Laserfiche WebLink
Craig Schlichting <br />From: <br />McCann, Mike <MJMcCa@in-ctrl.com> <br />Sent: <br />Tuesday, September 08, 2015 1:02 PM <br />To: <br />Scott Boller <br />Subject: <br />In Control - NB Tower Mixer Controls <br />Scott <br />After looking at the GSR, Forestdale Tower, and South Tower, it should be fairly straight forward to integrate the mixer <br />controls into the existing control panels at each site. Basically 4 wires will need to be run from the mixer starter panel to <br />the PLC control panel at each site. I would estimate 6 hours per site to complete the wiring and programming. This <br />works out to 18 x $130/hr = $2,340 in labor. <br />When we did the high service tower, I had to replace the current transmitter in the starter panel with a current <br />switch. If the mixer supplier could provide a current switch instead, I will not need to replace it. Otherwise, if I need to <br />replace them, the price will 3 x $150 = $450 for parts. <br />Thanks <br />Mike McCann <br />In Control, Inc. <br />10350 Jamestown Street NE <br />Blaine, MN 55449 <br />Office: 763-783-9500 <br />Mobile: 651-955-2353 <br />mimccaCcDin-ctrl.com <br />