Laserfiche WebLink
Existing Zoning Code text: <br /> Article 2. R-1A District <br /> Sec. 4-110. Permitted Uses in an R-IA District. <br /> Any use or structure permitted and regulated in the R-I District. (Code of 1988; Code of <br /> 2001) <br /> Sec. 4-120. Permitted Accessory Uses in an R-IA District. <br /> Any use or structure permitted and regulated under"accessory uses" in the R-I District. <br /> (Code of 1988; Code of 2001) <br /> Sec. 4-130. Special Permit Uses in an R-IA District. <br /> Any use or structure permitted and regulated under"special permit uses" in an R-1 <br /> District. (Code of 1988; Code of 2001) <br /> Sec. 4-140. Lot Standards in an R-IA District. <br /> (1) The requirements for setbacks, yards, height and building coverage are the same as <br /> the requirements in an R-1 District. <br /> (2) The minimum requirements for lot dimensions shall be: <br /> A. 40 feet wide at front lot line and building setback line. <br /> B. 5,000 square feet of lot area. <br /> (3) On lot smaller than 7,500 square feet, the building coverage (principal and <br /> accessory) on a lot shall not exceed 40 percent of the total lot area. <br /> (4) On lots smaller than 7,500 square feet, the total site impervious surfaces shall not <br /> exceed 55 percent of the total lot area. (Ord. No. 669, 3-28-00; Code of 2001) <br /> 1:\COMMISSIONS\PLANNING\Reports\2005\07-I9-05\ZA05-08_Lot Width in R-1A distnct.doc <br />