0758 - Laserfiche WebLink

Home Browse Search

right -way line. A freeway ground sign shall not exceed 170 square feet in area and not exceed 35 feet in hei t. On each street side of less than 100 feet, a single ground sign not exceeding twelve square feet in are 1 shall be permitted. (2) W ll Sign. A single wall sign is permitted per street frontage. Such sign shall not exceed forty percent of th elected signable area or 200 square feet in area, whichever is less. Signable area is an area of a build' g free of windows or doors. The maximum size of the selected signable area is determined by calcu ting the number of square feet that are enclosed by an imaginary rectangle around this area. I (3)A ltiple Occupancy Building. See regulations under Section 9-110. (4) B �lding Sides not Abutting a Street. See regulations under Section 9-120. 1 (5) O -Street Parking Sign. A wall sign may be displayed on the side or rear of a building adjacent to an off-st et parking area if the off-street parking area has five or more parking stalls and such stalls are on the pi c miser. In no case shall the size of a permitted wall sign be larger than the size of a permitted wall sign oi 1 the front of the building. (6) E ctronic and/or Dynamic Signs. A single electronic and/or dynamic sign per lot is permitted so long such sign conforms to the ground and wall sign regulations of this Section and the following addit nal operating conditions: A. Message changes may not occur any more frequent than once per 8 seconds. Excluded from this standard are time, temperature, and fuel price signs. B. 35 feet of separation from another sign considered dynamic. C. Luminance levels must comply with the following: 5,000 nits — 7,000 nits in the daytime hours and not more than 500 nits in the nighttime hours. D. The sign manufacturer must submit certification at the time of Sign Permit issuance that the sign has the mechanical capabilities to control luminance at the levels noted in C above. In no instance shall the sign have the mechanical capabilities to exceed 7,000 nits. E (7) P manent Window Sign. Permanent window signs may not exceed 25 percent of the total area of the vdow in which they are displayed. (8) III ��I��I porary Window Sign. The total area of window signs (both permanent and temporary) may not ex ce fifty percent of the area of the window in which they are displayed. (9) �7. porary Sign. A temporary sign is permitted as regulated in Section 9-046. (Ord. No. 534, 9-24- 85; No. 620, 2-13-96; Code of 2001; Ord. No. 758, 3-11-08) Sec. F090. Commercial Zoning Districts, B4 and B-5. The regulations for the B-4 and B-5 zoning districts are generally based on the sign regulations for the zoning district except that the City Council shall have the authority to allow flexibility in signing based on the nature of the B-4 and B-5 zoning districts. Notwithstanding the foregoing, billboards are not pe ted in B-4 or B-5 zoning districts. (Ord. No. 534, 9-24-85; Ord. No. 620, 2-13-96; Code of 2001) Sec. OrI00. Industrial Zoning Districts, I-2 and I-3. Page 14 of 17