Laserfiche WebLink
(4) Fences, as approved by Special Use permit. <br /> (5) 25% of floor area may consist of clean room assembly, laboratories, and storage <br /> provided such use is clearly accessory to, and secondary,to the principal use. <br /> Sec. 6-710. Site Standards <br /> (1) Lot Area, Lot Width, and Yard Requirements. <br /> A. Minimum lot width: 100 feet <br /> B. Minimum lot area: 20,000 square feet <br /> C. Setback—Principal Structure: <br /> 1. Front: As established by Build-to Line in this ordinance <br /> 2. Side: 0 (zero) feet <br /> 3. Corner Side: same as Front <br /> 4. Rear: 15 feet minimum <br /> D. Setback—Accessory Structure: <br /> 1. Front: At least 5 feet greater than Principal Structure setback <br /> 2. Side: 0 (zero) feet <br /> 3. Corner Side: same as Front <br /> 4. Rear: 5 feet minimum <br /> E. Setback—Parking <br /> 1. Front: Minimum as established by Build-to Line in this ordinance, no <br /> maximum <br /> 2. Side: 0 (zero)feet <br /> 3. Corner Side: same as Front <br /> 4. Rear: 5 feet minimum <br /> F. Setback to I-35W and I-694, or where no Build-to Line applies: <br /> 1. Minimum structure setback: 30 feet <br /> 2. Minimum parking setback: 15 feet <br /> G. Front Yard Build-To Line. In the NWQ District in the front yard, a build-to line is <br /> established that provides a minimum and maximum front setback for buildings <br /> and other structures, from the right-of-way line. For parking, the minimum <br /> setback applies, but not the maximum. The types of build-to conditions are <br /> described below, and illustrated on Figure 1: <br /> 1. Build-to Line A. Minimum setback shall be 10 feet, maximum setback shall <br /> be 20 feet, see Figure 1. <br /> 2. Build-to Line B. Minimum setback shall be 10 feet, maximum setback shall <br /> be 44 feet, see Figure 1. <br /> (Underline reflects new language,Strileurgh reflects deleted language) <br />