Laserfiche WebLink
05 <br />• RTU 1-7 are using OA Enthalpy <br />to as decision process to enable <br />Economizer and disable <br />mechanical cooling. <br />• System is equipped with <br />scheduling capabilities. Currently <br />the building is operating with a 24 <br />hours per day 7 days a week. <br />• Modify enable sequence for <br />RTU's to allow economizing <br />and mechanical at the same <br />time. Sequence on RTU <br />internal configuration may not <br />allow mechanical to enable <br />until OA is full open. Add <br />sequence to intelligently control <br />min OA damper position <br />setpoint to maximize OA intake <br />in those instances <br />• Operating as much as <br />possible is ideal for air <br />exchange through the facility. <br />However, the units should be <br />periodically transitioned to <br />Unoccupied operation for <br />calibration purposes. <br />At a Glance <br />• Ventilation Prioritization <br />control sequencing maximizes <br />fresh air ventilation while <br />maintaining normalized space <br />temperature conditions. <br />• Allowing the units to periodically <br />unoccupy and recalibrate will help <br />ensure that OA dampers are <br />performing as expected for <br />consistent air exchange. <br />